|Treating Capacity(kg-DS/h)||12 - 160|
The JD-series is an organic sludge dehydrator utilizing the concepts of "gravity-filtration" and "compression". A total of 14 rollers comprising of multi layered discs form the filter of the equipment. Since all the rollers always rotate when it is in service, the flocculated sludge is hard to be plugged-up, therefore, this dehydrator can be used not only for the excess sludge generated from various types of wastewater treatment but also for an oily sludge or DAF froth.
In addition, since the rollers rotate in a very low speed with small-sized motors, the dehydrator saves energy, and also, noise and vibration are minimum.
|JD-500||12 - 40||1.65||500||2207||1035||1827|
|JD-750||18 - 60||1.85||750||2362||1285||1829|
|JD-1000||24 - 80||2.6||1000||2341||1535||1829|
|JD-1500||36 - 120||1.4||1500||2600||2180||2045|
|JD-2000||48 - 160||1.75||2000||2800||2680||2045|
・The treating capacity will vary depending on the characteristics and concentration of the sludge. Typical treating capacity per 1000mm wide filtering roller are 40 kgDS/h for excess sludge, 50 kgDS/h for wastewater and sewage treatment sludge, and 60 kgDS/h for DAF froth and livestock waste sludge. It is recommended to select a model with adequate allowance.
・The motor output means the total motor output of the motors mounted in the unit, but does not cover the motor output of the sludge supply pump, polymeric coagulant mixing equipment, etc.